LUTRON Caseta Wireless In-Wall Dimmer Custom Rigged for Portable use (with Wireless Remote Control)
Product information
On Sale
+
Description
Circa Early 2000's
A robust, wireless, remote controlled lamp dimmer—installed into a weatherproof box incorporating a corded plug and triple-tap outlet. Useful for managing practical lighting on set with a combined output of 600 watts (see below).
Features:
- Clear Connect RF Reliability: Unlike Wi-Fi-based consumer dimmers, LUTRON uses its proprietary 434 MHz frequency. This is critical on a film set crowded with wireless video (Teradek) and follow-focus systems, as it won't suffer from signal interference or dropouts.
- No Interference with Sound: Caséta dimmers are engineered to be exceptionally quiet and rarely cause the "buzzing" or "humming" in lamp filaments that can ruin a sound take.
- Multi-Point Control: You can pair multiple Pico remotes to this one rig. One remote can stay with the Gaffer, while another is mounted to the director’s monitor for quick adjustments during a rehearsal.
Dimmer Compatibility:
- LEDs: Ensure all connected bulbs are labeled as "Dimmable." Non-dimmable LEDs will flicker, buzz, or may even be damaged when used with this rig.
- No Motors or Fans: This specific dimmer is designed for lighting only. Do not plug in fans, heaters, or power tools, as inductive loads can destroy the electronic components inside the Caséta unit.
Specifications:
Lutron Caséta In-Wall Dimmer (PD-6WCL)
- Operating Voltage: 120 V~ 50/60 Hz.
- Load Capacity (Incandescent/Halogen): Up to 600W.
- Load Capacity (LED/CFL): Up to 150W (approx. 17 bulbs at 8.5W each).
- Minimum Load: Typically requires at least 10W for proper operation without a neutral wire.
- Circuit Type: Single-pole or multi-location (via Pico remote).
- Operating Temperature: 32 °F to 104 °F (0 °C to 40 °C).
- Wireless Protocol: Lutron Clear Connect (Proprietary RF) at 434 MHz.
Pico Remote Control (PJ2-3BRL)
- Wireless Range: 30 ft (9 m) through walls; 60 ft (18 m) line-of-sight.
- Battery Type: One CR2032 lithium battery (included).
- Battery Life: Rated for 10 years of typical use.
- Frequency: 431 MHz to 437 MHz.
Custom Rig Components
- Housing: Weatherproof 1-Gang non-metallic "While-In-Use" outlet box.
- Power Input: 3-prong grounded plug on a heavy-duty yellow SJTW cord.
- Power Output: 3-way triple-tap "Squid" or grounded splitter.
- Base: 4x Rubber vibration-dampening feet for surface stability.
(H-18cm x W-19cm x D-13cm)