SECO-LARM Enforcer DP-222Q Color Video Door Phone Kit (Fully Functional)

Circa 2016

This is a complete videophone/camera kit and will operate normally as it would in an actual installation. Can be paired with the SECO-LARM Electric Deadbolt SD-997BQ (available separately).

INSTALLATION INSTRUCTIONS

Use Cases:

• Visitor Screening: Allows occupants to see and communicate with visitors before deciding whether to grant access, providing a layer of security by visually identifying individuals at the door.

• Remote Door/Gate Control: When connected to compatible locking devices (like electric door strikes or electromagnetic locks), users can remotely unlock doors or gates for authorized visitors directly from the indoor monitor.

• Nighttime Monitoring: Equipped with infrared LEDs, the outdoor camera enables clear visibility of visitors even in low-light or nighttime conditions.

• Convenient Communication: Offers two-way audio communication via the built-in microphone and speaker, enabling conversation with visitors without needing to physically open the door.

• Expanding Intercom Systems: Can be integrated with additional monitors for multiple viewing points within a property, and some models allow for inter-monitor communication, functioning as an internal intercom system as well.

Specifications:

Camera:

• Type: Color Camera
• CMOS: 1/4” CMOS Sensor
• Resolution: 700 TV Lines
• Lens: 3.6mm
• Relay Output: 1A@12VDC Max. Dry Contact
• Current Draw: 150mA
• IP Rating: IP55
• Weight: 11-oz (312g)
• Dimensions: 51/4” x 39/16” x 13/8” (130 x 90 x 33 mm)

Monitor:

• Display: 4” Color TFT
• Operating Voltage: 17VDC
• Re-Lock Delay: 3 seconds
• Current Draw: Active—700mA/Standby—50mA
• Weight: 1-lb, 7-oz (652g)
• Dimensions: 75/8”x 81/2” x 113/16” (194 x 216 x 46 mm)

PLEASE NOTE: 22AWG 2-conductor wire is required for connection to the camera from the monitor (not included). The total wire length between the camera and monitor must not exceed 246ft (75m).